What is the Standard Specification for building safety net

What are the standards of building safety net in the production process of safety net? Building safety net is a labor-intensive industrial product, and the production process goes through several processes. The first is to purchase raw materials, including primary plastic particle high density polyethylene (HDPE). The finished products are mainly dense mesh nets for testing, and the recycled materials are generally preferably mineral water bottle cap materials, and then crushed and granulated by machine. Then there is wire drawing or wire making. This process is very important. The cooling water temperature needs to be accurately controlled in the production process. The thickness, color and flexibility of the produced plastic wire determine the quality of the finished product. The next step is to weave the net. The usually used dense mesh looms are 2M and 4m wide. In this production process, the weaving process also determines the quality of the finished products. It is mainly to control the weaving structure and weaving density of dense mesh, usually mesh density: ≥ 800 mesh / 100cm ² above. The next step is needle sewing. First cut the woven cylindrical mesh, usually measuring 6.2m to 6.5m, so that the length can be maintained about 6m after sewing. When sewing, wrap the rope near the edge of the mesh and then turn it together. The weight of the rope is suitable for the mesh and should not be light or too heavy. Sew it twice around the edge of the mesh to ensure it is firm, and turn in the product certificate. After sewing, the eye nail, a metal ring, is used to tie the rope when hanging a dense mesh net. Usually, more than 20 to 30 holes are punched. Earlier, it was made by hand, and now it is widely made by machine. Finally, fold the mesh, pack it, and then leave the factory.

Type of safety net: the safety net can be set vertically and horizontally according to the suspension mode.